SILICONE DEFOAMER (Paper making & Pulp)

FEATURES
A、Good dispersibility and low viscosity
B、Good antifoaming and rapid foam control
C、Excellent performance under medium high temperature and strong alkali conditions.

TYPICAL PROPERTIES
Appearance: White or light yellow emulsion---------------------------------- (Approximately about)
Solid content（%）：50.0±1.0--------------------------（GB/T6284-2006 Loss on drying method)
PH value：5.0～8.5----------------------------（GB/T 26527-2011 Aqueour solution PHpaper Test）
(These figures are only intended as a guide and should not be used in preparing specifications）

APPLICATIONS
Typical recommended applications: High temperature vacuum in papermaking pulping;
breaking foam in pressure pulp washer. Recommended application areas: Antifoaming in chemical cleaning of high temperature and strong alkali and aqueous system of high temperature and strong alkali. HOW TO USE
It could be added directly. The volume of addition is 0.5‰～0.6%. According to your specific conditions, optimum volume of addition could be adjusted. If it is used after
dilution, it is recommended to dilute with a certain concentration of thickening water and a certain amount of preservatives, and the dilution ratio should not be too large. The dilution
process can be stirred at a slow speed (to avoid destroying the stability of the emulsion by rapid stirring). If consequence is caused by incorrect methods of processing or using this product, Company will not bear the consequence.

PACKAGE AND STORAGE
This product is available in plastic bucket of 200kg or 1 ton box packaging, and it can be customized according to the special needs.

The stored temperature is between 5℃ and 35℃ in the original unopened containers. According to chemical storage methods, please ensure seal after using to avoid be bad.

Expiration time is 9 months.