Coating Lubricate Agent
Description
It is water-based polymer dispersion.
This product has obvious lubrication effect when used in papermaking coating.
It can greatly reduce the wear of coating equipment such as scrapers, prevent cylinder sticking, reduce the viscosity of paint, improve the viscosity of paint, etc.; at the same time, it can significantly improve the smoothness, gloss and gloss of coated paper.
Surface strength and printing adaptability, etc. This product is nearly colorless and does not affect the whiteness of the paper.
This product has good compatibility with most latex, PP pigments, dyes, optical brighteners and other coating additives currently on the market.
Specification
Appearance: Light yellow liquid
Solid Content wt %（150℃、30min）： ≥24%
pH： 6.0-9.0
Viscosity(mPa·s, 25℃，Brookfield, 1# spindle @60rpm) ：≤100
Application
In papermaking coatings, the general dosage is 0.2-1.0% (based on absolute dry pigment).
The latex is added during the preparation process and then added to the batching tank.
Packaging and Storage
IBC Drum or according to customer need.
Please keep this product in its original container, or place it in a clean stainless steel, plastic container or plastic-lined iron container to prevent moisture from evaporating.
Store at 5-30℃, storage period is 6 months.
It is normal for the product to freeze below zero. If it is heated to below 40℃ and melted, it will be stirred thoroughly and it will not affect normal use.
Strictly prohibited for use in food and feed processing

Paper coating chemical